HPL panels for architecture and interiors in Tashkent —
from material to finished project
Panels, substructures, components, engineering calculation and installation. All elements in one system.
Four areas — one engineering logic
Each task gets its own material series, fixing system and calculation.
HPL in cross-section
What a sheet is made of and where its properties come from: a protective layer, decor and a dense core pressed into a monolith.
- 01Protective layer
Transparent surface protection
A melamine resin top layer protects the decor: the surface does not absorb dirt and is easy to clean. Facade panels also have a UV-protective film on top, so the decor does not fade in the sun.
- 02Decor
UZHPL decors
Wood, stone, concrete, solid colours, metal and super-matt surfaces — patterned paper impregnated with resin.
- 03Core
Kraft paper layers
Many layers of kraft paper with phenolic resin. Their number sets the sheet thickness: 6, 8 and 10 mm for facades.
- 04Pressing
150 °C and high pressure
The layers are pressed into a pore-free monolith: the panel is unaffected by moisture and temperature swings.
- 05Finished sheet
Uniform throughout the thickness
The sheet is cut, drilled and fixed as a solid material. Batch parameters are in the UZHPL technical data sheet. Documents →
Eight layers of one facade
Tap a layer — its purpose, options and consumption per 1 m² according to UZHPL calculation. Facade systems →
The diagram is an illustration. The design, substructure spacing and loads are determined by the project.
One system instead of five suppliers
- Panels from one supplier, substructure from another
- Installation by a crew found “through an ad”
- No one checks joint compatibility
- Facade questions — no one knows whom to ask
- One system — panel, substructure, fixings and insulation selected together
- One contract — calculation, supply and installation
- Technical supervision — European technical approach — under the contract
- Documents — a data sheet for every batch, 12-month installation warranty
- UV layerprotective layer of facade decorsUV resistanceUV-protective layer of facade decors.
- B-s1,d0class to EN 13501-1Fire safetyThe panel’s fire class is in the technical data sheet, on request.
- 100 MPaflexural strength — fromStrengthDensity from 1.4 g/cm³: a facade panel withstands ball and hail impacts.
- 20+ yearsof adhesive fixing on a facadeTime-testedThe facade was installed in 2000–2002; in 2023 the adhesive joint was tested — its strength matches the adhesive’s data sheet.
- Trial lesson
- Video lessons
- Practice
- Certification
- Certificate
Installation by the technology
and control of every joint
Installation is carried out by our own and partner crews. The technology is the same on every site. Under the contract, joints and workmanship are checked by our technical supervision department — a European technical approach.
- 01Materials salesHPL panels and components with documents for every batch.To the catalogue
- 02Bill of materialsThe whole facade in one order: from the anchor to the rivet in the decor colour.Calculate
- 03CuttingA cutting map for your project when you order panels.More details
- 04InstallationOwn and partner crews in Tashkent, travel to the regions.Installation systems
- 05Technical supervisionJoints and workmanship are checked by technical supervision — a European technical approach.More details
Partnership with UZHPL
Architects, dealers, installation crews and manufacturers get their own terms and a dedicated section.
Where we look for partners
Map of regions and dealersOpen →UZHPL partners
A predictable result, not loud promises.
We come from construction and know where a facade loses quality — at the junction of suppliers, contractors and drawings. That is why UZHPL is responsible for the whole system: panel, substructure, fixings and installation work as one solution. A European engineering school adapted to Uzbekistan’s conditions and budgets.
About usHow UZHPL is growing
What already works, what opens soon and what is still planned. Future stages are plans; dates may shift.
Tell us about your project —
we’ll choose the system
Send us your project, photos or dimensions. We reply within one working day: an engineer will clarify the input data, choose a system and prepare an estimate — usually within 24 hours; for complex projects we agree on the timing.