Knowledge base

Answers about HPL, installation and ordering

Articles and short answers to frequent questions: facades, interiors, laboratories, furniture, calculation and delivery. Didn’t find an answer? Ask an engineer or the community.

HPL, DBSP and compact laminate: what they are, types and where to buy →

Articles

Fronts

Facade HPL: what it is and where it is used

Compact panels with a UV-protective film for a ventilated rainscreen facade.

Read →
Interiors

Interior HPL panels for walls and washrooms

Moisture-resistant non-porous panels for public spaces, corridors and washrooms.

Read →
Furniture

Furniture HPL: compact and thin laminate

Compact for worktops and fronts without a substrate, and thin HPL for cladding particleboard and MDF.

Read →
Laboratories

Laboratory HPL: worktops and walls

Panels for laboratories, clinics, schools and research institutes — worktops, sinks and wall panels.

Read →
General questions

UZHPL decor collections

500+ decors: wood, stone, concrete, solid colours, metal, super-matt and seamless.

Read →
Fronts

Substructure for a ventilated facade

Brackets, profiles, anchors and barriers that hold an HPL facade.

Read →
Fronts

Insulation and membranes for the facade

Basalt slab and wind barrier membrane for a ventilated facade.

Read →
Fronts

Panel fixing: rivets and adhesive system

Two facade fixing systems: rivets in the decor colour or concealed adhesive fixing.

Read →
General questions

Tools for HPL installation

Tools for installing panels and substructure will be available in the UZHPL components shop — opening in Q1 2027.

Read →
Calculation, ordering and delivery

Project calculation and estimate

An online configurator, an engineer’s estimate and free measurement when you buy HPL.

Read →
Furniture

Cutting map and panel processing

Cutting for your project is free when you order panels; processing is done by partners.

Read →
Calculation, ordering and delivery

Installation of HPL facades and interiors

Installation is done by our own and partner crews trained at UZHPL Academy.

Read →
Calculation, ordering and delivery

UZHPL technical supervision

Engineering control of joints and installation quality — a European technical approach.

Read →
Calculation, ordering and delivery

Delivery across Uzbekistan

Free delivery of HPL and components to site for orders from 2000 m².

Read →
General questions

Technical consultation

Selection of the panel, fixing system and details for your project.

Read →
General questions

UZHPL Academy

Video lessons on HPL installation and specialist certificates you can check by QR.

Read →
Calculation, ordering and delivery

How to place an order and pay

Request, commercial offer, contract and payment — step by step.

Read →
Documents and standards

Installation warranty

Installation: 12-month warranty. Exact terms are in the contract.

Read →

Questions and answers

Fronts

How much does a turnkey HPL facade cost?

It depends on thickness, decor, fixing system and facade complexity. For a guide, see the calculator above. An exact estimate within 24 hours after measurement or from drawings.

How does the riveted system differ from the adhesive one?

Riveted is mechanical fixing with visible heads in the decor colour, easy to repair. Adhesive is concealed fixing with a monolithic look, but it needs the right conditions for the adhesive to cure.

Which insulation should I choose?

Thickness is determined by the design and thermal calculation. Typically: 50 mm for commercial buildings and warm regions, 80 mm for residential buildings, 100 mm for enhanced thermal protection.

Can I buy just the materials?

Yes — switch off installation in the calculation or put the items together in the catalogue. The cutting map is free when you order panels.

What warranty do you give on facade installation?

Installation is covered for 12 months under the contract: geometry, fixings, no delamination; we fix installation defects at our own expense.

Interiors

Which thickness should I choose?

For wall panels — 6–10 mm compact. For cubicles, partitions and urinal screens in washrooms — 12–13 mm. An engineer will choose the exact thickness for the room and load.

How are the panels fixed to the wall?

Four systems: concealed on hooks (compact from 8 mm), adhesive, screwed and riveted. The choice depends on the panel thickness, the room and whether the fixings may be visible. All systems in section →

Is HPL suitable for washrooms and showers?

Yes. Compact laminate doesn’t swell or delaminate from water.

What should I clean HPL walls with?

The surface is non-porous. Daily wet cleaning and household chemicals are fine.

What about fire safety?

The panel’s fire class is in the technical data sheet, on request. This is the class of the panel, not of the whole facade or interior system.

How much does it cost and what’s included?

A guide price is in the calculator; the exact estimate comes from an engineer. The cutting map is free when you order panels, delivery to site across Uzbekistan is free for orders from 2000 m², and the installation warranty is 12 months.

Laboratories

How chemically resistant is the surface?

To SEFA 3-2020 (SGS report, 2024): of 49 reagents, 35 left no change, 14 caused a slight change in colour or gloss without affecting properties, and there were no unacceptable changes — the test was passed. A laboratory compact with a black surface was tested; before ordering we will check the list against your reagents.

What thickness are the worktops?

Laboratory HPL 16 and 20 mm is for worktops and sinks. Wall panels come in the same thicknesses as interior ones; an engineer will choose the exact thickness for the room.

How are wall panels fixed?

Two systems with invisible fixings: adhesive for 4–6 mm panels, concealed on hooks from 8 mm.

Where can I get the technical data sheet and test reports?

The technical data sheet is open in the technical library; test reports are available on request.

Is it suitable for clinics and schools?

Yes. The surface is non-porous: it doesn’t absorb moisture or dirt and withstands daily treatment.

How do I calculate the cost?

The calculator covers walls and laboratory furniture separately; an engineer sends the exact estimate within 24 hours.

Furniture

Which HPL should I choose for furniture?

Thin laminate 0.35–2.9 mm — cladding for particleboard and MDF: fronts, carcasses, worktops on a substrate. Compact 10–20 mm (common thicknesses; others to order) — self-supporting fronts, shelves, worktops, window sills and bar counters.

Do you do cutting and processing?

The cutting map is free when you order panels. Cutting to size, chamfers, radii, sink cut-outs and holes are done by our partner workshops — the cost is shown in the parts calculation.

How do I finish the edge?

For thin HPL on a substrate there is edging in the same decor: 24 and 29 mm, 1 mm thick. Seamless decors have a core matching the surface — the edge needs no banding.

Where can I see a decor in person?

Some decors are in the showroom at 235 Parkent St. All 500+ decors with colour and purpose filters are in the catalogue.

How do you deliver?

Anywhere in Uzbekistan, to the site or workshop — free for orders from 2000 m². Unloading as per contract.